404 Loading a new control program

Loading a new control program

If your Tracker IPm is connected to the Internet, we can update control program using our IPm Web Control otherwise here is the procedure to load from your PC.

See this link for instructions to connect your PC

If you haven’t done it already, down load the I/O Tool Kit software and install it on your Windows PC.

You will be sent a Toolkit project file (xxx.6PJ ) and an ISaGRAF project (appli.X6M) by email.

Save them in an accessible folder on your PC.

Run the I/O Tool Kit sent to you

If you are prompted to Register click here for Registration Instructions

Configure / Configure Station/Module

Select “Files to Load” tab at the top.

Select “Project” button

Select the appli.X6M file previously saved. Open / OK

Operations / Load / Load Advanced (Select Files)

Check only the ISaGRAF box with the directory where you placed the file. Load

The project will automatically run. You are finished.