404 Dual Axis Controller

Dual Axis Controller

TRACKER500

 

 

 

 

 

 

 

PERFORMANCE SPECIFICATIONS

  •  Industrial powerPC (32 bit data bus)
  • Operating system embedded Linux
  • Dynamic memory (RAM) 32 Mbytes – 32bit, 0 wait states
  • Program memory (Flash) 32 Mbytes
  • Retained memory (RAM) 512K (battery-backed)
  • Data logging (OPTIONAL)
  • Custom programming available

 ETHERNET PORT

  • 10/100BaseTx (auto-detecting)
  • RJ45 connection (auto-crossover)
  • Protocols TCP/IP, ARP, UDP, ICNP, DHCP, Modbus/TCP, DNP3 Slave

 SERIAL PORT

  • RS485 port A screws (485+, 485-, GND) (2-wire half-duplex)
  • RS232 Port B RJ45 (TD, RD, CTS, RTS, CD, DTR,DSR, GND)
  • Protocols (master & slave) SIXNET & Modbus RTU/ASCII;
  • Flow control hardware, software, RTS-party (for radios and RS485)

 DISCRETE INPUTS

  • 12 channels (sinking or sourcing)
  • Guaranteed ON voltage 9 VDC
  • Maximum voltage 30 VDC
  • Guaranteed OFF voltage & current 5.0 VDC & 1.5 mA DC
  • Input resistance 10K Ohms
  • Input current @ 24 VDC 3 mA
  • Filtered ON/OFF delay 25 mS (20 Hz max. counting)
  • Fast ON/OFF delay 4 mS (100 Hz max. counting)
  • Count rate (channels 1 – 8) (10 KHz on channel 1)

DISCRETE OUTPUTS

  • 4 channels (10-30 VDC)
  • Maximum output per channel 1 Amp
  • Maximum output per module 4 Amps
  • Max. OFF state leakage 0.05 mA
  • Minimum load 1 mA
  • Inrush current 5 Amps (100 mS surge)
  • Typical ON resistance 0.3 Ohms
  • Typical ON voltage (@1A) 0.3 VDC

ANALOG INPUTS

  • 8 channels (4-20 mA, 0-2VDC, 0-5VDC, 0-10VDC)
  • A/D resolution 16 bits (0.003%)
  • Full scale accuracy +/-0.1% (@20°C)
  • Span and offset temp. coef. +/-50 ppm per °C
  • Input impedance 100 Ohm
  • Current protection Self-resetting fuses
  • DMRR (differential mode rejection) 66 dB at 50/60 Hz

ANALOG OUTPUTS

  • up to 2 channels (4-20 mA, 0-20mA 0-10VDC with Resistor)
  • D/A resolution 16 bits (less than 1?A)
  • Full scale accuracy (@20°C) +/- 0.02%
  • Span and offset temp. coef. +/- 50 ppm per °C typical
  • Max. output settling time 5 mS (to .05%)
  • Load resistance range (@ +24 VDC supply) 0-750 Ohms
  • Short circuit protection current limiting

 ENVIRONMENTAL

  • DIN rail or fl at panel mount
  • Input power 10-30 VDC
  • Input current 100 mA @ 24 VDC (typical)
  • Operating Temp: -40 to +70°C  (-40 TO 85C storage)
  • Shock: IEC60068-2-27,
  • Vibration: IEC60068-2-6
  • Humidity: 5 to 95% non-condensing

 CERTIFICATIONS

  • Flammability UL 94V-0 materials
  • EMC: emissions FCC, part 15 and Industry Canada, ICES-003 Class A; EN55022; EN61326-1
  • EMC immunity EN61326-1 (EN61000-4-2,3,4,6)
  • Hazardous Locations: Class I, Div. 2, Groups A,B,C,D, UL1604, CSA C22.2/213, Cenelec EN50021 Zone 2
  • Electrical Safety: UL508/CSA22.2/14 (CUL); EN610101; (IEC1010)