404 1 Axis Brush Motor

1 Axis Brush Motor

This drawing provides a simplified overview on how everything connects to a typical brush motor / Kinematics slew drive shown here. The feedback utilizes the pulses from the drive motor Hall sensors. The Tracker IPm uses only one Hall feedback for positioning.

Analog inputs from inclinometers and other 4-20mA feedback devices can be used on either axis.

Tracker IPm Terminations for DI Sourcing (Factory Default)

404-1030-r5-Sourcing1-1024x674

Click for enlarged view

Altitude Relay and Slew Drive Wiring. Digital Inputs and Outputs for sourcing pulse feedback or analog input.

404-1030-SO-r5

Click for enlarged view

1022-306-WiringRelaysMotorK_ALTr2

Click for enlarged view